EOS TPU 1301
The parts made from this white material are extremely hydrolysis-resistant, with high resilience and good tribological properties. The degree of flexibility can be influenced by the part design and the choice of process parameters and can even be varied within the same part.
Image of part: Colored part made of EOS TPU 1301
|Typical mechanical properties in xy print direction|
|Tensile modulus||60 MPa|
|Tensile strength||7 MPa|
|Strain at break||250%|
|Melting temperature (20°C/min)||138°C|
|Density (lasersintered)||1100 kg/m³|
Footwear & lifestyle parts that demand elastomeric properties, e. g. handles, shoe soles
→ Automotive & industry parts, e.g. tubes, bellows, seals, gaskets
→ Protective sports gear, e.g. helmet cushioning
→ Applications usually made from foam can be replaced by lattice structures in EOS TPU 1301.
The data corresponds to our knowledge and experience at the time of publication. They do not on their own represent a sufficient basis for any design, neither do they provide any agreement about or guarantee the specific properties of a product or part or the suitability of a product or part for a specific application. It is the responsibility of the producer or customer of a part to check its properties as well as its suitability for a particular purpose. This also applies regarding the consideration of possible intellectual property rights as well as laws and regulations. The data are subject to change without notice as part of EOS's continuous development and improvement processes.