Parts made from pigment free polyamide 12 powder are also white but appear slightly more translucent. This material is approved for contact with food (FDA, 21 CFR) and its other properties are similar to PA 2200 – strength, rigidity and good chemical resistance.
|Typical mechanical properties in xy print direction|
|Tensile modulus||1700 MPa|
|Tensile strength||48 MPa|
|Elongation at break||15%|
|Melting temperature (20°C/min)||176°C³|
|Heat deflection temperature (1.80 MPa)||70°C³|
|Heat deflection temperature (0.45 MPa)||154°C³|
This cost-efficient general-purpose material is suitable for a variety of applications, including functional prototypes and qualified series production parts from several industries.
The data correspond to our knowledge and experience at the time of publication. They do not on their own represent a sufficient basis for any design, neither do they provide any agreement about or guarantee the specific properties of a product or part or the suitability of a product or part for a specific application. It is the responsibility of the producer or customer of a part to check its properties as well as its suitability for a particular purpose. This also applies regarding the consideration of possible intellectual property rights as well as laws and regulations. The data are subject to change without notice as part of EOS's continuous development and improvement processes.