PrimePart FR (PA 2241 FR)
This polyamide-12-based material is white and contains a halogen flame retardant. Due to the materials high reusability, it is very cost-efficient compared to other flame-retardant materials. The additively manufactured parts have a good tensile strength.
|Typical mechanical properties in xy print direction|
|Tensile modulus||1900 MPa|
|Tensile strength||49 MPa|
|Elongation at break||9%|
|Melting temperature (20°C/min)||185°C|
|Heat deflection temperature (1.80 MPa)||84°C|
|Heat deflection temperature (0.65 MPa)||154°C|
Typical applications are in the interior of aircraft, e.g. ventilation ducts and exhaust valves.
The data correspond to our knowledge and experience at the time of publication. They do not on their own represent a sufficient basis for any design, neither do they provide any agreement about or guarantee the specific properties of a product or part or the suitability of a product or part for a specific application. It is the responsibility of the producer or customer of a part to check its properties as well as its suitability for a particular purpose. This also applies regarding the consideration of possible intellectual property rights as well as laws and regulations. The data are subject to change without notice as part of EOS` continuous development and improvement processes.